Completely self contained
and easy to install in your boat or RV.
This model is UL certified and complies with CSA, FCC, CE specifications and has been approved by the California State Fire Marshall.
GS/3 Wiring Diagram
Run power lines (#18 AWG minimum with 1/32"
insulation) from the 12 volt battery to the installation
location. Red (+) via a fuse or breaker of no more than
0.5 Amps and black (-).
Connect power to the leads from the detector,
(red to positive, black to negative)*. Wires may be soldered
or splice crimped. Connections must be insulated. Snap the
top onto the back. YouÕre done!
*If you accidentally reverse the polarity,
the detector will not be damaged, but will not function
until you reconnect the wires correctly.
